Work on the part of the client. The stages of the project in which I participated: from earthworks to the NDP Organization of the work of the quality control department "from scratch" (recruitment, obtaining the necessary permits and training, concluding an agreement with the laboratory and contractors, implementation of internal procedures). Restoration of executive documentation for 2021-2022 Organization of acceptance and inspection of works by the contractor ENKA Inşaat ve Sanayi A.Ş. (civil works, installation of steel structures, technological pipelines, tanks, engineering networks (ОВ, ВК), verification and signing of as built documentation.

Object: Construction of a residential complex in Svobodny city Work on the part of the client Organization of construction control over the production of construction and installation works in accordance with the approved design and estimate documentation, work schedule, approved standards and specifications. Development of procedures for incoming control of material, equipment and acceptance of work performed. Ensuring that construction control is maintained in accordance with the RFI procedure. Technical control over the production of construction and installation works in accordance with the approved design and estimate documentation, the work schedule, approved standards and technical specification. Control over the availability of laboratory test passports for the supplied products. Control of the use of construction materials, equipment and products that meet state standards and specifications. Do not allow the use of construction materials, details and products that do not conform GOSTs and specifications. Conduct, in conjunction with contractor construction organizations, periodic inspections of the conformity of the quality of construction materials, details and products to passport data. Monitor the timely and correct maintenance of general and special logs of work and author's supervision log book. All the results of observations of technical supervision of construction is drawn up in a journal or acts. Monitor the timely implementation of the instructions and recommendations recorded in the log book by the authorial supervision and representatives of regulatory authorities. Participation in the inspection and formalization Act for hidden work and special work, preventing the performance of subsequent types of work before the signing of the acts. Identification and classification of defects, consideration and approval of solutions for elimination. Approval of entries in the author's supervision log and confirmation of the implementation of instructions. To agree and sign the asbuilt-technical documentation presented by construction and installation organizations after acceptance, completed stages, works. Control and maintenance of a register of NCR, tracking delays and elimination periods. Conducting claim work. Management of a team of 10 people.

Object: Kolskaya Wind Farm, 201 MW Work on the part of the client Organization of work on the construction of highways, unloading and assembly sites for lifting equipment, ensuring the quality of work to the requirements of the project. Participation in work planning, making technical decisions necessary to complete work on time, interacting with design organizations. Work in difficult climatic conditions, the extreme north, rocky and swampy terrain. The reason for the dismissal is the completion of work.

Object: Sakhalin-2 Onshore Processing Facility Compression Project Work on the part of the general contractor Based on the assignment of an engineer in the discipline (electrical, civil works, steel structures), drawings are prepared with the necessary projections and sections, bindings to the actual coordinate system, and all the necessary bills of materials and symbols are drawn up. Technical support of the Construction Department when working with drawings: searching for the necessary drawings in different disciplines, checking dimensions, coordinates and material in accordance with the 3D model, processing drawings in AutoCAD (developing additional nodes, sections and plans, calculating the volume of work, etc.). Identification of clashes between the systems and structures in a 3D model, preparation of a technical solution. Carrying out duties in the structure of Field Engineering Department. Preparation of technical documentation: TQ, FCN, TDR (technical query, field change notice, technical deviation report). Based on experience in construction participate consideration of MAR, TQ (civil works, steel structures), from subcontractor, preparation of responses. Making changes to the design drawings (all discipline) modification bills of material in accordance with GOST 2.503-2013. Participation in the assembly of the archive of drawings with changes (RLM). Completion of drawings for asbuilt-technical documentation and mechanical completion dossier. Keeping a register of changes. Stamping of drawings with a stamp "For construction". The reason for the dismissal is the reduction in the number of employees.

Object: Kolskaya Wind Farm, 201 MW Verification of organizational and technological documentation before the start of the main stage of work (method statement, flowchart, inspection quality control plan). Checking the equipment of the Contractor with the necessary materials, equipment, tools. Carrying out incoming control of materials, inspection and acceptance control of completed stages of works on general construction works and installation of metal structures (RFI).

Object: Amurski Gas Processing Plant Project (AGPP) Area of responsibility: earthworks, foundations for buildings and structures. - coordinate the activities of the contractor (Renaissance Heavy Industries) in the entrusted area in accordance with the work schedule; - check, supplement and sign on a daily basis PTW; - carry out operational control of excavation and concrete work, identify deviations from the working documentation and project requirements; in case of identification, take measures to eliminate, participate in the preparation of the technical request (TQ) and receive an answer to it as soon as possible; - carry out verification of executive geodetic schemes, test reports; - participate in inspections (RFI) of the completed stage of work (excavation, reinforcing, formwork installation, installation of anchors, concreting, etc.); - early detection of the clash of various projects and disciplines using AutoCAD, Navisworks programs. Provide information to the Superintendent and to the FE department; - analyze the results of inspections, identify systematic errors and deviations, take measures to eliminate them in the future; - track the release of new revisions and modifications of drawings and drawings with the status of "suspended"; monitor the progress of work in accordance with updated drawings; - determine the available work front and inform all construction participants about this; - interaction with the QC department for issuing / closing requirements; - prepare reports on the progress of work, open fronts of work, the missing number of personnel / equipment, revealed violations of HSE; - inform the immediate supervisor of all significant changes at the construction site; - monitor compliance with all requirements of HSE; The reason for the dismissal is the reduction in the number of employees.

Object: Yamal LNG Project, LNG Plant Civil and installation of steel structures in modular buildings (electrical substations): check of availability of materials, specialists, permits (i.e., method statements, process flow charts), and of required tools and equipment; Control of works performance in compliance with the design and regulatory documents, control of quality of completed works, ensuring works are carried out against PtW, check of special logbooks and General Logbook Closure of technical issues, occurring during works. Interface with FE in case of difficult engineering issues. Continuous interaction with electrical installation departments for coordination of general activities, arranging and refocusing of labor for implementation of unforeseen works. Compliance to schedules of works, review and identification of reasons of backlogs, taking corrective actions to recover backlogs Review and signing as-builts Review and tracking of logistics of construction materials supplied to site by sea and by air Identification of works that were not part of subcontractors SoW Total facilities (electrical substations, buildings): 32. Total subcontractors: 3 (Velesstroy, SNEMA-Service, Rega JV), total workforce: 30-50

Work for General Contractor Object –Kindergarden for 240 places, Zayb settlement, Naberezhnye Chelny city. -Drawing up of completing registers for site improvement -Work planning for subcontractors (site improment underground networks, MAF) and setting of adjacent questions in connection with production works in compressed time. -Control of construction works quality for organization asphalt concrete passages, planting of greenery, installation MAF and barriers, carrying out of brick laying (sheds) and earth works. -Decision of technical questions for state customer -Checking up of executive documentation, and quality of executed works. Object: reconstruction of football stadium “Kamaz”, Grenada Park, Naberezhney Chelny city. -Drawing up of completing registers for concrete, finishing and welding works, site improvement. -acceptance control of project documentation, delivery of remarks. -work planning for subcontractors and setting of adjacent questions on the ground in accordance with production works in compressed time. -quality control for the main kinds of works. -Decision of technical questions for state customer. -Checking up of executive documentation and quality of executed works.

Kuril Islands, Kunashir. Federal program of non-conventional energy sources development (use of geothermal wells). Executed works: work with drawings concerning concrete structures, excavation of pits, foundation layout for additional buildings (light towers and fire fighting, pipe racks etc.), formworks assembly, reinforcing, roof-bolt setting, concrete casting, waterproofing; work with drawings concerning technical control, arrangement lay of line track, welding works concerning units enlargement (pipe + detail), installation of technological pipelines on pipe racks; work with drawings concerning piping of the binary power plant manufactured by Ormat Systems LTD, piping of technological equipment. Maintenance of welding works log, welding materials recording, acceptance control, execution of as fitted drawings concerning installed sections of pipelines. Management of the team of 15 persons and more.

Object - hotel with a restaurant, karaoke hall. 8 floors, 216 rooms, total area 11 thous. sq.m. Control of compliance of the executed general construction and partially engineering works (Heating and ventilation, Water supply and sewage) with the project documentation, SNiPs and GOSTs of the Russian Federation. I took up my duties during execution of in-situ concrete works of the third floor. I executed control of the used materials and execution of the following work stages: in-situ concrete works, roofing, facade works (windows and stained-glass windows installation, external insulated render system installation), interior finishing, installation of plumbing equipment. Acceptance of the executed works and signing of KC-2, KC-3 forms. On-site solution of problems connected with project documentation, amendment of the detailed documentation. Participation in object commissioning: preparation of the necessary documentation, demonstration of the finished construction to the committee, implementation of corrections. After hotel opening I worked in the position of building constructions maintenance engineer: conclusion of agreements for servicing and repair of the object. I acquired knowledge in the sphere of general structure and principles of hotel and restaurant work.

Object - Bovanekovo airport, additional buildings. Organization and control of construction and installation works quality. Execution of welding works, logs filling in, acts drawing up, submission of executed volumes to the Department of Building Control. Maintenance of labour protection logs. Management of the team up to 35 people.

Kharampur oilfield, piping of oil wells. Organization, procurement, compliance with the technology of works execution. Piping of oil extracting wells, construction of accompanying facilities, objects. Mainlaying, heat insulation work. Site improvement. Work directly with customers. Drawing up of acts and schemes of executed works. Maintenance of labour protection logs. Management of the team up to 40 people.

Tuapse Oil Refinery Plant, reconstruction. Organization, procurement, compliance with the technology of works execution. Zero cycle of construction - earthworks, out-door plumbing system, monolithic foundations, walls, columns arrangement. Site improvement. Work with design estimate documentation, acts drawing up. Maintenance of labour protection logs. Management of the team up to 20 people.